Revo Digital video recorder User Manual page 46

User's Manual
A–B Backup
Selecting A–B Backup or pressing the BACK UP button on the remote control during playback will set the starting point
of the video to be clip copied, and the
or pressing the BACK UP button again will set the ending point of the video to be clip copied and displays the Backup
screen.
Backup
Select Backup or press the BACK UP button on the remote control while in the Search mode or Live Monitoring mode,
and the Backup screen appears to allow backup setup.
 Channels: Select the cameras that you would like to include in your video clip.
 Password: Pressing the
video clips.
 Dest.: Select the storage device on which you would like to record the video clip.
CAUTION: The USB device for backup must be FAT 16 or FAT32 format.
 File name: The DVR automatically assigns a file name to the video clip. However, you can give the video clip file
a different name. Pressing the
and select Close. The DVR will automatically add ".exe" to the file name.
NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, ", <, >, |.
Once you have given the video clip a file name, select Start and press the
data size will appear. When the storage device does not have enough space, the DVR will ask if you want to copy as
much of the video clip as possible in the available space. Select Continue and press the
Once the backup starts, you can cancel it by selecting Stop or hide the screen by selecting Close. When selecting
Close, Backup continues and a confirmation screen displays when complete.
NOTE: The file size for backup is limited to 30GB. When backing up video clips larger than 2GB, the video clips
will be save in units of 2GB. For example, 3 individual 2GB files will be created when saving a 6GB video clip.
You can use other functions on the DVR while video is being copied. To do this, select Close and press the
You can return to the Backup screen at any time to check the progress.
You do not need to install any special software on your personal computer to review the video clips. Refer to the REVO
Remote Pro manual for instructions on how to review video clips you have copied.
NOTE: During Backup, you cannot shut the system down or clear data on the storage device.
CAUTION: Do NOT disconnect the USB flash drive from the DVR while backing up video.
40
icon displays at the bottom-left corner of the screen. Selecting A–B Backup
 From: Pressing the
to Off, you can enter a specific Date and Time. When set to On, the
copy will be from the first recorded image. When highlighting
pressing the
point you selected will be the starting date and time.
 To: Pressing the
Off, you can enter a specific Date and Time. When set to On, the copy
will be to the last recorded image. When highlighting
the button the bookmark list displays and the bookmark point you
selected will be the ending date and time.
button displays a virtual keyboard allowing you to enter a password for reviewing the
button displays a virtual keyboard. Enter a file name for the video you are copying
button toggles between On and Off. When set
button the bookmark list displays and the bookmark
button toggles between On and Off. When set to
button. A confirmation screen displaying
and
and pressing
button to continue backup.
button.