System Setup - Revo Digital video recorder User Manual

NOTE: Selecting Quick Setup or Network Setup in the Main Setup screen runs the selected setup wizard. Refer
to the previous Quick Setup Wizard section for information regarding the Quick Setup and Network Setup.
Selecting Advanced Setup in the Main Setup screen displays the following Advanced Setup screen, and gives you
to access to all the DVR's setup screens. Your DVR can be set up using various screens and dialog boxes.
Throughout the screens you will see
the opportunity to reset that screen to its default settings. You can save your changes by selecting the Save button and
pressing the button. Selecting the Cancel button exits the screen without saving the changes.
NOTE: When the installed hard disk drive is not formatted, a message box appears asking you to format the
hard disk drive. If you want to record video, you must format the hard disk drive.

SYSTEM SETUP

System Settings (SYSTEM  System Tab)
. Selecting the and pressing the
16 Channel Digital Video Recorder
button on the remote control gives you
System Menu
Network Menu
Camera Menu
Record Menu
Event Menu
Display Menu
13