Paper Size Error - Oki OKIPAGE18 Maintenance Manual

3

Paper size error

• Is paper of the specified size used?
• No
• Yes
• No
• Is the printer recovered?
• YES END
• YES Does the outlet sensor lever operate smoothly.
• No
• Is the printer recovered?
• YES END
• Yes
• Is the printer recovered?.
• No
• YES END
40931201TH Rev. 4
Use paper of the specified size.
Do the inlet sensor lever and paper width sensor lever operate smoothly?
Replace the inlet sensor lever or paper width sensor lever.
• No Clean the inlet sensor 1 or paper width sensor on the Power Supply
Unit (High Voltage). (See Figure 2-3 Sensor Layout Diagram.)
• Is the printer recovered?
• No Replace the Power Supply Unit (High Voltage).
• YES END
Replace the outlet sensor lever.
• No Clean the outlet sensor on the Power Supply Unit (AC120V or 230V).
(See Figure 2-3 Sensor Layout Diagram.)
• Is the printer recovered?
• No Replace the Power Supply Unit (AC120V or 230V).
• YES END
Clean the inlet sensor 1, inlet sensor 2, and outlet sensor.
(See Figure 2-3 Sensor Layout Diagram.)
Replace the Power Supply Unit (High Voltage).
135 /