Oki OKIPAGE18 Maintenance Manual page 119

Category LCD status message
Daily status
READY
ERROR PAPER SIZE
CHECK jjjjjj
ATTENTION
READY
DUPLEX INPUT JAM
REMOVE THE PAPER
ATTENTION
READY
DUPLEX FEED JAM1
REMOVE THE PAPER
ATTENTION
READY
DUPLEX FEED JAM2
REMOVE THE PAPER
ATTENTION
READY
DUPLEX FEED JAM3
REMOVE THE PAPER
ATTENTION
READY
DUPLEX OPEN JAM
REMOVE THE PAPER
ATTENTION
READY
PAPER INPUT JAM
CHECK jjjjjj
ATTENTION
Trouble or status
Paper of improper size was fed from the tray.
Informs that, in feeding papers from tray n to the Duplex unit, a jam
occurs in the separator or Duplex unit, by monitoring OUTSNS ON ~
DUP INSNS ON.
Informs that, in feeding papers form n tray to the Duplex unit, a jam
occurs in the separator or Duplex unit, by monitoring DUP INSNS ON ~
DUP INSNS OFF.
Informs that, in feeding papers from n tray to the Duplex unit, a jam
occurs when a paper is reversed to the reverse roller of the Duplex unit,
by monitoring MOTOR (Duplex) ON ~ DUP R SNS ON.
Informs that, in feeding papers from n tray to the Duplex unit, a jam
occurs when a paper is impinge-fed in the Duplex unit, by monitoring
DUP R SNS ON ~ DUP F SNS ON.
Jam which occurs in feeding papers to the Duplex when the first tray
cassette is pull out in paper-remaining state. Structurally, No first tray
cassette will cause no reverse root for papers and open the Duplex
cover downwards.
Informs that a jam occurs during paper running after exiting from the
tray.
Remedy
Check the paper in the tray or check to see if more than
one sheet of copy were fed simultaneously.
Open the cover, then close it to perform recovery printing
and the error display is released.
If this error occurs frequently, see chapter 6.5.2
Remove all of the paper in the printer.
Open the cover, then close it to perform recovery printing
and the error display is released.
Remove all of the paper in the printer.
Open the cover, then close it to perform recovery printing
and the error display is released.
Remove all of the paper in the printer.
Open the cover, then close it to perform recovery printing
and the error display is released.
Remove all of the paper in the printer.
Open the cover, then close it to perform recovery printing
and the error display is released.
Remove all of the paper in the printer.
Open the cover, then close it to perform recovery printing
and the error display is released.
Check the paper in the cassette. Open the cover, then
close it to perform recovery printing and the error display is
released.
If the error ocuurs frequently, see chapter 6.5.2