Troubleshooting Method; Lcd Status Message List - Oki OKIPAGE18 Maintenance Manual

4.3

Troubleshooting Method

When a problem occurs, go through the troubleshooting according to the following procedure.
Problem occurs
Problem displayed by
the LCD message
4.3.1

LCD Status Message List

The listing of the statuses and problems displayed in the form of messages on the LCD is provided
in Table 4-1.
Classification
Jam Error
Jam Error
Jam Error
Jam Error
Jam Error
Interface Timeout
40931201TH Rev. 4
Troubleshooting
according to the LCD
Status Message List
(see 4.3.1)
Table 4-1
LCD Status Message
Informs that a jam occurs in
DUPLEX INPUT JAM
feeding papers to the Duplex
REMOVE THE PAPER
Unit.
Informs that a jam occurs in
DUPLEX FEED JAM1
retracting papers into the re-
REMOVE THE PAPER
verse roller within the Duplex
Unit.
Informs that a jam occurs in
DUPLEX FEED JAM2
reversing papers in the re-
REMOVE THE PAPER
verse roller within the Duplex
Unit.
Informs that a jam occurs in
DUPLEX FEED JAM3
impinge-feeding papers within
REMOVE THE PAPER
the Duplex Unit.
Informs that the 1st tray is
DUPLEX OPEN JAM
pulled out in paper-remaining
REMOVE THE PAPER
state when feeding papers
within the Duplex.
Informs that an I/F time-out
ERROR
occurs between the printer
83
and Duplex.
Carry out detailed
troubleshooting
according to the
Troubleshooting Flow
(see 4.3.2)
Description
• Remove all the papers from the inside of
printer unit and Duplex unit and close the
cover.
• Remove all the papers from the inside of
printer unit and Duplex unit and close the
cover.
• Remove all the papers from the inside of
printer unit and Duplex unit and close the
cover.
• Remove all the papers from the inside of
printer unit and Duplex unit and close the
cover.
• Remove all the papers from the inside of
printer unit and Duplex unit and close the
cover.
• Verify connection of LEX-PCB and
square-shaped connector. Replace the
square-shaped connector if necessary.
• Replace LEX-PCB
Recovery method
189 /