Oki OKIPAGE18 Maintenance Manual page 108

b.
FORM FEED key
LCD display
40931201TH Rev. 4
Setting
Example : When setting head type to TYPE3WB( both-sided wire-bonding head)
and head drive time to No. 14.
+
ENTER key
+
Power ON
ENG MNT
Press the
Menu key.
Default setting is AUTO
HEADTYPE
AUTO *
Press or key, until
TYPE3WB is displayed.
The correspondence with model number in the Marking
HEADTYPE
label is as follows.
TYPE3WB
Press the
ENTER key.
HEADTYPE TYPE3WB is set to EEPROM.
TYPE3WB *
( * is displayed on LCD)
Press the
Menu key.
Display privious
LED HEAD
parameter No.
No. 17 *
Press or key, until
14 is displayed.
LED HEAD
No. 14
Press the
ENTER key.
LED HEAD
Parameter 14 is set to EEPROM.
No. 14 *
( * is displayed on LCD)
Press the ON LINE key. After initializing process is completed,
the printer enters into the operation mode and the setting operation
is finished.
(Do not turn the power off until the printer enters into the on-line state.)
TYPE3 : 405472
TYPE3WB : 404382
108 /