Disassembly
Removing and Replacing the Camera Assembly
G
G
26
1.
Remove the battery cover, battery, SIM, antenna, and transceiver PC board as
described in the procedures..
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent ESD and component damage.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Use the disassembly tool to unseat the camera assembly flex connector from
the transceiver PC board assembly (see Figure 12).
Camera assembly connector
Figure 12. Removing the Camera Assembly Connector
October 12, 2006
MOTOSLVR L9/L72
061542o
6809510A66-O