Removing And Replacing The Transceiver Pc Board - Motorola MOTOSLVR L9 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Transceiver PC Board

G
G
6809510A66-O
1. Remove the battery cover, battery, SIM, and rear housing as described in the
procedures..
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent ESD and component damage.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Insert the flat end of the disassembly tool under the keypad PC board flex
connector to unseat it from the transceiver PC board (see Figure 9).
Keypad PC board
Flex Connector
Coaxial Cable Connector
Figure 9. Removing the Transceiver PC Board Connectors
3. Unseat the display flex connector with the flat edge of the disassembly tool (see
Figure 9).
4. Use the metal tweezers to remove the speaker connector plug from its socket
(see Figure 9).
October 12, 2006
Display Flex Connector
Transceiver PC board
Disassembly
Speaker
connector
061499o
23