Table of Contents
Advertisement
Disassembly
Removing and Replacing the Keypad PC Board
30
1.
Remove the battery cover, battery, SIM, antenna, transceiver PC board, and
front housing, as described in the procedures.
2.
Use the Torx driver with a T3 bit to remove the 3 screws from the Keypad PC
board (see Figure 16).
Keyboard screw
Figure 16. Removing the Keypad PC Board Screws
3.
Rotate the end of the PC board up and disconnect the flex connector underneath
the keypad PC board (see Figure 17).
Keypad PC board
Coaxial Cable
connector
Figure 17. Removing the Keypad PC Board Flex Connector
4.
Use the coaxial cable extraction tool to disconnect the coaxial cable connector
from the PC board and move the coaxial cable away from the PC board.
5.
Remove the silver colored chassis seal.
October 12, 2006
MOTOSLVR L9/L72
Keyboard screws
061616o
Flex connector
061544o
6809510A66-O
Advertisement
Table of Contents
Troubleshooting
