Removing And Replacing The Front Housing - Motorola MOTOSLVR L9 Service Manual

Disassembly

Removing and Replacing the Front Housing

28
1. Remove the battery cover, battery, SIM, antenna, and transceiver PC board as
described in the procedures.
2. Insert the disassembly tool between the front housing and the chassis assembly
(see Figure 14).
Figure 14. Releasing the Front Housing Catches
3. Slide the disassembly tool around the phone between the front housing and
the phone to release the housing catches along the sides of the front housing
(see Figure 14).
4. Carefully lift and remove the front housing from the phone.
5. To replace, align the front housing to the phone.
6. Lower the phone onto the front housing and keypad.
7. Carefully and gently press the front housing into the chassis until all of the
housing catches are engaged.
8. Reassemble the transceiver PC board, transceiver PC board shield, antenna
cap, SIM, battery and battery cover as described in the procedures.
October 12, 2006
Front housing
Disassembly tool
MOTOSLVR L9/L72
061505o
6809510A66-O