Table of Contents
Advertisement
In PC mode, you can adjust the H, V-Position, Native Mode and Phase. Also you can adjust them automatically.
Geometry
You can change H, V-Position, Native Mode and Phase in PC mode like usual PC monitors.
You can also adjust them automatically. (Auto adjust function.)
Press Menu/set button to display the main OSD menu.
1
Select the picture main menu with CH+, CH- button.
2
Press Menu/Set to enter the sub menu.
3
Select Geometry and press Menu/Set to enter the
4
sub menu. Then the picture Geometry sub menu
will appear.
1
Select the item to adjust with CH-, CH+ button.
Press Menu/Set button.
2
Then the cursor moves on the bar and you can
3
adjust the value with VOL-, VOL+ button.
To adjust these items, automatically, select Auto
4
Adjust and press Menu/Set button.
For more detail description refer to the next page.
Setting the Picture ( PC )
Mode
Temperature
Geometry
H-Position
V-Position
Phase
Native Mode
Auto Adjust
Standard
Normal
ON
35
OWNER'S MANUAL
Advertisement
Table of Contents
