Connecting The Set Top Box - InFocus TD32 Owner's Manual

How to connect
Connect Set Top Box video inputs to AV, COMPONENT, PC or DVI jacks on the Monitor.
Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.
How to use
1 Turn on the Set Top Box.
Press INPUT button on the remote control
2
of the Monitor and select Component1,
Component2, PC or DVI.
How to connect
With Component
Connect a three separate component cables to the component jacks of the STB and the Monitor.
Connect L (White)and R (Red) sound cables (composite) to the sound jacks of the STB and the Monitor.
With RGB(D-Sub) or DVI
Connect a D-Sub or DVI cable to the AV video jacks of the STB and the Monitor.
Connect L (White)and R (Red) sound cables (composite) to the sound jacks of the STB and the Monitor.
• Component, PC and DVI ports can be displayed only 1 signal among them. If one of them is being displayed, other
sockets are unavailable.

Connecting the Set Top Box

Supported Signals
Component1
480i/60Hz
480p/60Hz
576i/50Hz
576p/50Hz
720p/50Hz
720p/60Hz
1080i/50Hz
1080i/60Hz
Component2 PC DVI
– –
– –
OWNER'S MANUAL
21