USB-C port HDMI IN port TOUCH USB port VGA audio/video port Signal output ports ..................21 HDMI OUT port OPTICAL FIBER port AUDIO OUT port Control ports ....................21 RS232 port Remote Control InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 3
SystemBar Icon Name ................39 Main Screen Swipe Up Menu ..............39 Input & Output ....................40 Touch Sounds Sound Output Input Naming External Source HDMI & USB-C System ......................42 Date & Time InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 4
Languages & Keyboard Password Control System ......................46 Startup & Shutdown PC Module Shutdown Startup & Shutdown Schedules Pixel Shift Email Settings Storage System Update System ......................51 Security About ......................52 InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Neither InFocus nor any of its affiliates, subsidiaries or licensees shall be responsible or liable for misuse of the information that is contained herein. If you have any suggestions for improvements or amendments or have found errors in this publication, please notify us.
HDMI Licensing Administrator, Inc. in the United States and other countries. • HDBaseT® is a trademark of HDBaseT® Alliance. • InFocus, InFocus LightCast, IN, LightPro are registered trademarks of InFocus Corporation. • Trademark PJLink® is a trademark applied for trademark rights in Japan, the United States of America and other countries and areas.
Page 7
3. Great care has been taken in the preparation of this guide; however, should you notice any questionable points, errors or omissions, please contact us. 4. Notwithstanding article (3), InFocus will not be responsible for any claims on loss of profit or other matters deemed to result from using the Interactive Touch Display.
Do not try to repair this Interactive Touch Display yourself. Refer all repairs to qualified service personnel. Place the Interactive Touch Display near an outlet where the plug can be easily unplugged. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 9
If installation work is not carried out correctly, the Interactive Touch Display could fall down. This may result in injury or accidents. Contact your InFocus authorized dealer to carry out the installation work.
Page 10
Thermal deformation or technical malfunction may occur, which could result in fire. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 11
Do not use or store this Interactive Touch Display outdoors for an extended length of time. Fire or electric shock may result. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 12
Do not allow a still picture or an active picture containing stationary text or icon to remain on the screen of the Interactive Touch Display for too long because this will leave a "ghost image" on the screen, and it will not disappear long after shutdown. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
To indicate that the marked item can be hot and should not be touched without taking care. IEC 60417 Symbol No. 6042 ISO 3864-B3.1, Caution Risk of Electric Shock. To identify equipment that has risk of electric shock. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Getting the latest version of documents You can get the latest version of this user's guide as well as other product information and literature by visiting the InFocus website. Visit infocus.com and enter your Interactive Touch Display model number in the search box.
This product is preinstalled with professional writing software. It provides multiple types of pens, drawing tools and other functions, and you can write and move the contents as you like. Accessories Included in the box InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 16
Touch Gestures The following images detail the touch gestures used on this display Single Left Single Right Spread Pinch Swipe Up Swipe Down InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Audio In 3.5mm 3.5mm cable connection for input of audio from external devices VGA In Analog video input USB-A 2.0 USB data connection (used mainly for service) SPDIF Digital Audio InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
(Please charge those external devices with same or less rated charging power with the port. Do not attempt to charge laptops that require higher charging power than the rated power of the USB Type-C port. ) InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
When a suitable USB-C cable is connected to an external device such as laptop, the connection will provide power video signal, touch control and data transfer through the same cable. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
When the TOUCH USB port is connected to the same device with the signal source, the external device can be operated by the TOUCH function. VGA audio/video port Note For signal formats supported by the VGA port, see the Technical Paramters InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
AUDIO-OUT port can be connected with a headset or an external speaker. Control ports RS232 port Note RS232-IN port is connected to the PC; the product is operated via the PC. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Please dispose of waste batteries according to applicable environmental regulations. Do not expose batteries to any hot environment, like direct sunlight, over the fire. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 23
Return to the last operating interface 26 PgUp Page Up 27 PgDn Page Down 28 CH+ / CH- 29 VOL+ / VOL- Increase/reduce the volume 30 F1-F12 PC's F1 - F12 function keys InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Display Shortcuts The display has shortcuts for various menu options. These are located on the upper right-hand side of the display. These shortcuts can’t be modified or removed. fig.1 InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
• Swipe up from the bottom of the screen to open the “input” menu. (fig.2) • Select the signal source and then the product will switch to the input signal source you selected. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
• Open the “input” menu by swiping upwards from the bottom of the screen and using the volume slider on the lower left-hand side of the window (fig.1) • Press the shortcut volume icon in the upper right of the screen and use the slider to adjust fig.2 InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
• If a custom option is required press the “custom” and then scroll the icons in a circular motion to adjust the various settings. • A mute option is also available in this advanced screen InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
(this is regardless of how the ambient light changes at this time). • DCR adjust the contrast dynamically based on the content displayed on the screen InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
• If a custom option is required press the “custom” and then scroll the icons in a circular motion to adjust the various settings. • The colour gamut can also be set to one of the three options. Standard, Cold or Warm InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Use the slider bars to adjust each setting and make fine adjustments to the image where required. The AUTO settings are available when not using the “Android OS” input source. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
The WiFi will connect to the network and show as connected on the main WiFi page The WiFi can be switched to another network by following the above steps and can be switched off by changing the toggle switch. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
If the display is to be assigned a “fixed” IP address, disable the option for “Obtaining IP Address Automatically and populate the additional fields. This information should be obtained from your IT administrator ethernet fig 1 InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
• Change the toggle switch on the right-hand side to switch on the connection. It will change to a green colour. (hotspot fig 1) • The name and password can be adjusted in the Hotspot settings hotspot fig 1 InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
• Select the device to connect and pair with the display • Once connected it will appear as a connected device in the list • To unpair, the device, select it from the list and then either forget or disconnect. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
PCs to connect and upload/download files directly to the file manager. Note The username is set as Admin and cannot be changed. A password is strongly recommened during the setup to protect all content on the display. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
• Open the image • Select “settings” from the picture toolbar at the bottom • Select “set to wallpaper” on the right side of the menu to activate this as the new wallpaper InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Selecting “Disable in all channels” will result in no access to the apps menu, additonal tools and other features available on the display. To enable the sidebar, use a shortcut icon in upper corner of display to open the settings menu and naviagte to the SystembarChannel Settings InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
By default, this action will open the “Source menu” as shown in “Basic Settings” of this user guide. An alternative option is to have the action open a bottom “SideBar menu” as shown above (multi fig 1) InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
The “mixed” option available will allow audio from both internal and external connections at the same time. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
USB-C output can also be adjusted to either support a higher video frame rate output or a fast data transfer rate. The default setting is to provide a higher data transfer rate of USB-3.0 InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
The date format can be selected from the drop menu to provide a user preference The time zone is not automatically adjusted and will need to be set on the display to represent the current time zone of the display. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 43
A physical keyboard can be connected to the display via USB or Bluetooth. These keyboards will be displayed and if required the layout of the keyboard can be adjusted in this menu. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 44
If this is the first time then press “set password” and then enter in a 4 digit code and repeat to confirm the code. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 45
If either of the locks are no longer required or if the code needs to be changed, repeat the first steps to either “clear password” or “change the password” InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 46
Auto power off can be adjusted to turn the display off after a selected number of minutes. This action will monitor the touch activity and if no touch input is recognised in the period it will trigger the power-off action. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 47
The”add off task” is created to turn of the display in the same way as the boot task is set. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 48
All “Startup & Shutdown” tasks will be displayed at the bottom of the menu and can be activated and deactivated by toggling the switch. To delete or adjust a schedule, press the task name and either adjust the schedule or select delete. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 49
The email settings option can be configured to use a specific email account for the display so that they can be sent directly. Storage The storage option allows users to see how much of the internal storage is being used and to clean app data and any present. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 50
Advanced settings System Update System updates are periodically made available to users via the OTA (over-the-air) server from InFocus. Updates are normally only available as a manual activity to prevent releases interfering with user activity on the display at time when in use. To check if any updates are available, press the “check update” button and wait for a few seconds.
Page 51
Cloud Drive lock when enabled will prevent any files being saved to the cloud storage accounts that are configured on the display Samba/FTP lock when enabled will prevent the saving of files from the display to a remote connection storage location on a server. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...
Page 52
The about menu provides details of the display such as the Android version, module number and all legal notices for licenses required on the display. Some of this information maybe requested if a service case is reported. InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus...