Basic Operation - InFocus TD32 Owner's Manual

Basic Operation

Turning the Monitor On / Off
Press the Power button on the remote control. The Monitor will turn on and you will be ready to use its features.
You can also use the Power button on the front panel.
Select Source
Press INPUT button on the remote control. Then you can see the source list menu shown as below.
Source Change
1 TV
2 AV 1
3 AV 2
4 S-VIDEO /AV 3
5 COMPONENT 1
6 COMPONENT 2
7 PC
8 DVI
Source list menu
TV Channel Selection
Connect the signal source (TV antenna) to TV input. Press INPUT button on the remote control
1
and select TV on the source list.
2 Use CH+, CH- button or numeric button to change TV channel you want.
3 Press Pre.CH button on the remote control to watch the previous channel.
Also, you can tune the cable service, provided channels while using the cable box.
4
For further information regarding cable TV service, contact your TV service provider(s).
Volume Control
Use VOL+/VOL- button on the remote control to adjust the volume level.
Press MUTE button on the remote control when you need to cut the sound temporarily.
24
OWNER'S MANUAL
Select the source to watch with CH+/CH- button on the
remote control and press the Menu/Set button.