Setting The Others; Adjusting The Transparency Of The Osd Window; Pip (Picture In Picture); Changing The Size In Pip - InFocus TD32 Owner's Manual

Setting the Others

Translucent
Adjust the transparency of the OSD menu. There are 8 step from OFF to 7.
Press Menu/set button to display the main OSD menu.
1
Select the SET UP main menu with CH+/CH-
2
button on the remote control.
Press Menu/Set to enter the sub menu.
3
Select Translucent and press VOL+ button to enter the
4
parts. Then the cursor moves into the
Adjust with CH+/CH- button and press EXIT button.
5

PIP (Picture In Picture)

You can watch two channels or sources at the same time. And set up PIP size and position.
1 Press Menu/set button to display the main OSD menu.
Select the SET UP main menu with CH+/CH- button
2
on the remote control.
Press Menu/Set to enter the sub menu.
3
4 Select PIP and press Menu/Set to enter the sub menu.
Then the PIP sub menu appear.
Size in PIP (Picture In Picture )
Change the size of the PIP window. There are 3 sizes: SMALL, Large, Twin.
1
Select Size and press VOL+ button to enter the
2
Adjust size function with CH+/CH- button and press Menu/Set button.
40
OWNER'S MANUAL
parts.
PIP Window
parts. Then the cursor moves into the
Trucelant
OFF
PIP
V-Chip
Caption
OFF
Advanced
Trucelant
OFF
PIP
V-Chip
Caption
OFF
Advanced
Size
SMALL
Source
Picture Swap
Position
parts.