Choosing The Channel Type; Storing The Channel Automatically; Auto Scan - InFocus TD32 Owner's Manual

Setting the Channel
Channel Type
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the TV (i.e., an antenna, a standard cable system, an HRC, or an IRC).
Press Menu/set button to display the main
1
OSD menu.
Select the TV main menu item.
2
Press Menu/Set to enter the sub menu.
3
Select Channel Type and press VOL+ button
4
to enter the
into the
Select the channel type with CH+/CH- button
5
and press BACK button. You can select
AIR, CATV (Cable TV), IRC or HRC.
• You can enter the TV menu in TV mode only.
(When you watch a TV channel.)

Auto Scan

Press Menu/set button to display the main OSD menu.
1
Select the TV Main menu.
2
Press Menu/Set to enter the sub menu.
3
Select Auto Scan with CH+/CH- button and press
4
Menu/Set button on the remote control.
Then the tuning bar will appear and scanning will start.
• Only scanned channels can be stored as Favorite channels.
26
OWNER'S MANUAL
parts. Then the cursor moves
parts.
Auto Scan
Channel Type
Auto Scan
Fine Tune
CH
Channel Type
Auto Scan
Fine Tune
CH
Channel Type
Auto Scan
Fine Tune
CH
UHF
CATV
CATV 5
CATV
CATV 5
CATV
CATV 5
16