Insert Lightcast Key (Inf6501C Only); Connecting Ac Power; External Pc Touchscreen Control Setup; Turning The Monitor On/Off - InFocus INF6501C User Manual

Insert LightCast key (INF6501c only)

If your monitor did not ship with a LightCast key and you would like to use the LightCast features, you can purchase a LightCast key
(p/n INA-LCKEY1, INA-LCKEY2, or INA-LCKEY3 depending on your region) from InFocus (www.infocusstore.com) or your local dealer.
1) Insert LightCast key into an available USB A port on the side of monitor.

Connecting AC Power

1) Connect one end of the AC power cord to the AC In jack on the back of the monitor.
2) Connect the other end of the AC power cord to an AC outlet.
3) Press the power switch. (The LED on the front of the monitor turns on.)
NOTES:
• Your monitor should only be operated from the power source indicated on the label.
• Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period of time.

External PC Touchscreen Control Setup

1) Connect an external computer to the monitor using a DVI, HDMI, or VGA cable.
2) Connect the Type A to Type B USB cable to the USB Type A jack on the computer and to the USB Type B jack on the side of the
monitor.
3) The computer can now be controlled by using touchscreen gestures on the monitor.

Turning the Monitor On/Off

1) Verify that the power cord is connected to a power outlet and that the power switch is ON.
2) Press the Power button on the remote or the right side of the monitor.
NOTE: By default, the monitor goes into system standby after 30 minutes of inactivity. To change this behavior, use the Power Save
Mode feature in the menu system.
(With LightCast key)
Page 12
INF6501c INF6501w
(No LightCast key)