Adjusting The Pc Screen (Geometry) - InFocus TD40 PAL User Manual

Setting the Picture [PC]
In PC mode, you can adjust the H, V-Position, Native Mode and Phase. Also you can adjust them automatically.
Geometry
You can change H, V-Position, Native Mode in PC mode like usual PC monitors.
You can also adjust them automatically. (Auto adjust function.)
1 Press Menu/set button to display the main OSD menu.
Select the picture main menu with PG+, PG- button.
2
Press Menu/Set to enter the sub menu.
3
Select Geometry and press Menu/Set to enter the
4
sub menu. Then the picture Geometry sub menu
will appear.
Select the item to adjust with PG-, PG+ button.
1
Press Menu/Set button.
2
3 Then the cursor moves on the bar and you can
adjust the value with VOL-, VOL+ button.
4 To adjust these items, automatically, select
Auto Adjust and press Menu/Set button.
For more detail description refer to the next page.
38
OWNER'S MANUAL
Mode Standard
Temperature Normal
Geometry
H-Position
V-Position
Phase
Native Mode
ON
Auto Adjust