Connecting The Dvd - InFocus TD32 Owner's Manual

Connecting the DVD

Connecting the DVD
• Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the
Component jacks on the Monitor.
• Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio
jacks beside the Component jacks on the Monitor.
How to use
1 Turn on the DVD player.
Press INPUT button on the remote control of the
2
Monitor and select Component1 or Component2.
Component Input ports
You can get better picture quality if you connect
DVD player with component input sockets as below.
• Normal DVD source is based on 480i, which should be through normal YPbPr of Component signal.
• Component, PC, DVI ports can be displayed only 1 signal among them. If one of them is being displayed, other ports
are unavailable.
20
OWNER'S MANUAL
Supported Signals for Component ports
Component1
480i / 60Hz
480p / 60Hz
576i / 50Hz
576p / 50Hz
720p / 50Hz
720p / 60Hz
1080i / 50Hz
1080i / 60Hz
Component ports of
Y
the Monitor
Y
Video output ports of
Y
Y
DVD player
Y
Component2
P P
B R
Pb Pr
B-Y R-Y
Db Cr
P P
B R