Table of Contents
Advertisement
VIEWING THE PHONEBOOK
This 20 memories Phonebook lets you stores 20 records each of 15character names and
24digits number, it is a location dependent phonebook and you can scroll through the list by
arrow keys.
1. Press the MEM button.
2. Press the UP or DOWN button to find the one you need, If number is more than 1 page, it
will show 2 pages alternatively.
NOTE: To exit the Phonebook at anytime, press the BACK button.
EDITING NAME AND NUMBER IN THE PHONEBOOK
1. Press the MEM button.
2. Press the UP or DOWN button to find the one you want to edit.
3. Press MENU button to edit the name.
4. Use the TELEPHONE KEYPAD buttons (0-9) to re-enter the name. (up to 15 characters)
5. Press the MENU button once.
6. Use the TELEPHONE KEYPAD buttons (0-9) to re-enter the number. (up to 24 digits)
7. Press the MENU button to confirm and save the change.
IMPORTANT: It is not advisable to save a telephone number without the corresponding name
in the Phonebook.
Note: When no active buttons are pressed for 60 seconds, the LCD Display will automatically
return to STANDBY mode.
PLACING CALLS FROM THE PHONEBOOK
1. Press the MEM button.
2. Press the UP or DOWN button to find the one you want to call.
3. Press the TALK button to dial out the telephone number.
4. Start your conversation.
5. To end your conversation, either press the TALK button or place the handset on the base
unit.
NOTE: Be sure to check that the line is not in use by another parallel phone.
DELETING A STORED NUMBER IN THE PHONEBOOK
1. Press the MEM button.
2. Press the UP or DOWN button to find the one you want to delete.
3. Press the DELETE button The unit will ask you to delete the selected telephone number
and the LCD Display will show "DELETE THIS?"
4. Press again the DELETE button to delete. The LCD Display will show "DELETED!" and
returns to Standby mode.
MIXED MODE DIALING (Temporary Pulse to Tone Dialing)
1. If you only have pulse (rotary dialing) service in your area and want to access Tone
services (Phone banking service, etc.), ensure that the signaling mode setting in the
phone setup menu is set to Pulse mode.
2. Press the */TONE button once to switch from Pulse to Tone dialing temporarily. Pulse
dialing mode resumes when the call is ended.
PAUSE FUNCTION
•
In some cases, such as PBX or long distance service, a pause may be needed in the
dialing sequence. Pressing the handset PAUSE button inserts a four-second delay
between dialed numbers.
FLASH FUNCTION
•
Used to access custom calling features such as Call Waiting or Three-Way Calling
provided by your local phone company. Flash can also be used to restore a dial tone to
make a new call.
16
Advertisement
Table of Contents
