Mounting Position - Bell Excursion 35850 Instructions Manual

BASE UNIT CONTROLS
1. 9VDC Adapter Jack: A jack located on the bottom of the base unit used for connecting
the adapter to the base unit.
2. TEL LINE Jack: Accepts line cord to make connection with modular type telephone
outlet.
3. Charge Terminals: Used for charging the handset battery.
4. PROG Button: Used when you are registering a new handset to the base.
5. Page Button: Allows you to locate the handset when it is not on the base.
6. CHARGE/LINE-IN-USE LED Indicator: Lights up steadily when the handset is being
charged on the base or the phone is in talk mode. It will turn off when the handset is
removed from its cradle and not in use.
Front View
EXTRA CHARGE CRADLE CONTROLS
1. CHARGE LED Indicator: Lights up steadily when the handset is being charged on the
charge cradle. It will turn off when the handset is removed from the cradle.
2. Charge Terminals: Used for charging the handset battery.

MOUNTING POSITION

DESKTOP USE:
Connect the telephone line cord to the TEL LINE jack on the bottom of the base unit and
connect the opposite end to the telephone modular jack.
1
2
(Figure 3)
8