Table of Contents
Advertisement
WALL USE :
A. WITH A MODULAR WALL JACK
1. Install the wall mount bracket at the position as shown in Figure 4.
2. Connect the telephone line cord to the TEL LINE jack on bottom of the base unit.
3. Connect the opposite end of the telephone line cord to the modular wall jack.
4. Align the wall mounting slots with the studs located on the modular wall plate and slide
the base down to lock in place.
Telephone Modular
Wall Mounting
Slots
Wall Mount
NOTE: If you do not have a standard modular wall jack, find a qualified technician to mount
one on the wall.
B. WALL MOUNTING (No Standard Wall Jack)
1. Drill two holes with a vertical distance between the two marked
positions of 3 15/16"(100 mm) as shown in Figure 5.
2. Drive a screw into each of the holes. Tighten them to the end of the
screw line, only leaving the smooth part of the screw head outside
the wall.
3. Hang the unit onto the screws, then slide it down firmly to fasten the
base securely.
BELT CLIP INSTRUCTION
Remove the belt clip cover and clamp the belt clip to the back of the handset as shown in
Figure 6.
9
Base Unit
(Side View)
Belt Clip
Wall Jack
Studs
(Figure 4)
(Figure 5)
(Figure 6)
05111A-1
Advertisement
Table of Contents
