Dell PowerEdge 850 Installation And Troubleshooting Manual page 85

Hide thumbs Also See for PowerEdge 850:
Table of Contents

Advertisement

 Figure A-5. PCI-X/PCIe Riser Card Connectors
 Disabling a Forgotten Password
The system's software security features include a system password and a setup password, which are discussed in detail in "Using the System Setup Program"
in your User's Guide. The password jumper enables these password features or disables them and clears any password(s) currently in use.
 
CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the components inside the system.
Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the
computer and protecting against electrostatic discharge.
 
1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
 
2. Open the system. See
"Opening the
 
3. Remove the password jumper plug.
See
Figure A-2
to locate the password jumper on the system board.
 
4. Close the system. See
"Closing the
 
5. Reconnect the system to the electrical outlet, and turn on the system.
The existing passwords are not disabled (erased) until the system boots with the password jumper plug removed. However, before you assign a new
system and/or setup password, you must install the jumper plug.
NOTE:
If you assign a new system and/or setup password with the jumper plug still removed, the system disables the new password(s) the next
time it boots.
 
6. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
 
7. Open the system.
 
8. Install the password jumper plug.
See
Figure A-2
to locate the password jumper on the system board.
 
9. Close the system, reconnect the system to the electrical outlet, and turn on the system.
 
10. Assign a new system and/or setup password.
To assign a new password using the System Setup program, see "Using the System Setup Program" in your User's Guide.
Back to Contents Page
 
System" in "Troubleshooting Your System."
System" in "Troubleshooting Your System."

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents