Dell PowerEdge 850 Installation And Troubleshooting Manual page 64

7. Remove the hard-drive bay. See
a. Loosen the four screws that secure the drive bay to the system.
b. Slide the hard-drive bay out of the system.
8. Remove the drive from the drive bay. See
a. Remove the screws that secure the drive in the hard-drive bay.
b. Slide the drive out of the drive bay.
Figure 7-5. Installing or Removing a SATA Hard Drive
Figure 7-6. Installing or Removing a Cabled SCSI Hard Drive
Figure 7-5 and Figure 7-6.
Figure 7-5 and Figure 7-6.