Add/Edit Schedule Item Dialog - Schedule Field - Canon K-64 User Manual

Configure Normal Recording

Add/Edit Schedule Item dialog - Schedule field

To set the schedule for a camera's recording period:
Step 1: Set the recording period in the Start and End boxes
Alternatively, type over highlighted time with new time, or use the up/down arrows on your
keyboard to change the selected time. Use the left or right arrows on your keyboard to
move between minutes and hours and the tab button to jump to the next field.
An example time period could be for overnight recording such as 'Start: 22:00 to End 08:00'.
Alternatively, click the All Day button if you want 24 hour recording. The Start and End
times will be set at 00:00 and 00:00 respectively.
Step 2: Select the days for recording
Note
66
If you have defined any special day schedules, such as public
holidays, such schedules will override normal schedule times
for the whole day.
Times are given in 24 hours, for example 18:00 is 6:00 pm.
A schedule item cannot be more than 24 hours.
If a Camera Server has been configured with 'Restrict Service
Time', VK-64 will not be able to record from the Camera Server
during restricted times.
The time zone used for the recording schedule will be the time
zone configured on the Storage Server.
The Storage Server will adjust for Daylight Savings if configured
in the operating system.
Click the hours or minutes fields to
select, then click the up/down
arrows to change time.
In the Repeat on area, tick the days
you wish to repeat the recording
period you set in the Times area
above.