Using The Storage Server With Windows Xp Sp2 - Canon K-64 User Manual

Operating Environment
Before starting operations with VK-64
Note
When using a proxy server
When using the Audio feature (VB-C50i and VB-C50iR)

Using the Storage Server with Windows XP SP2

If your Storage Server is not installed on the same PC as your Viewer, you will need to
change your Windows firewall settings for the Storage Server on the PC with Windows XP
SP2.
After installation of the Storage Server on a PC with Windows XP with SP2:
1. From the Windows Start menu, launch the Control Panel.
2. In Control Panel, select Windows Firewall. If Windows Firewall is not shown, select
Security Center and then select Windows Firewall.
3. In the Windows Firewall dialog, select the Exception tab and then click Add Port....
4. In the Add a Port dialog, enter a name for the Storage Server, e.g., 'VK-64 Storage
Server'.
Enter the Port number as '80'. Make sure the TCP protocol is selected and click OK.
5. In the Windows Firewall dialog, your Storage Server is now listed. Make sure it is
enabled (checked). Click OK to close the dialog.
Settings are now complete.
14
It is recommended that you perform tests under actual
conditions before starting operations.
Recording and display of live videos may not be provided as
configured because
environment and
performance of VK-64.
If you use a proxy server, recording frame rate may not be
achieved as specified or live video monitoring may be
interrupted. Also, communication between the Storage Server
and Viewer may occasionally be disconnected.
Depending on the performance of your PC and network
environment, the audio stream may be interrupted.
The audio feature is not available via a proxy server.
If you use a PC on which anti-virus software is installed, the
audio stream may be delayed or the audio stream may be
temporarily interrupted.
many factors (such
PC performance)
as network
affect the actual