Canon K-64 User Manual page 65

The minimum duration for a schedule item is 15 minutes. If you
try to create a shorter schedule, an error message will appear.
Note
You cannot create overlapping schedule items.
Configuration is discussed on the following pages.
Configure Normal Recording
Set start and end times for one
or more days.
Set frame rate, enable motion
detection and sensor event
recording.
Select a camera angle for
recording.
Set backlight compensation.
Preview area. Camera angle
can be changed by moving
your mouse pointer in the
Preview area to display
controls and clicking to pan,
tilt and zoom ( P. 56).
Set Night Mode (VB-C50i,
VB-C50iR and VB150 only).
Set recording resolution.
Set External Outputs to On or
Not Specified. This applies to
the duration of the schedule
item.
6
65