Configure Camera Summaries; Camera Summary - Add, Edit And Delete A Storage Server - Canon K-64 User Manual

Configure Camera Summaries

Camera Summary - Add, Edit and Delete a Storage Server

When using multiple Storage Servers, you will need to configure the Storage Servers via
the Add Storage Server dialog shown below.
A Storage Server must first be connected and running on the network as follows:
Click the Add Storage Server button on the Storage Servers tab
Note
To edit a Storage Server:
Double-click a server in the list; or click to highlight it and click the Edit button. The
1
Edit Storage Server dialog appears with the selected server entry displayed.
Modify the entry and click OK to close and save changes.
2
Note
46
It is not recommended to add the same Storage Server more
than once (for example, by using Host Name one time and using
a corresponding IP address another time).
If you add a Storage Server with a different configuration (such
as one managed by another Master Storage Server), your
original Locations and Zones will be lost.
This function lets you change the network address used to
access a particular Storage Server in case the address has
changed.
The entry for the Master Storage Server cannot be edited or
deleted.
In the Camera Summary window, select
1
the Storage Servers tab.
Click the Add Storage Server button.
2
The Add Storage Server dialog opens.
Enter connection settings
3
and click OK.