Setting Up Users; Adding And Editing Users - Canon K-64 User Manual

Setting up Users

Adding and Editing Users

The Storage Server Configuration dialog, User Management tab allows you to set up users
and their privileges. Administrators have access to the Viewer including Camera Server
setup, recording schedules and Viewer setup. Operators only have access to live video and
pre-recorded video on Storage Servers they have permission to access.
The User Management tab is laid out in the following manner:
Users list - Lists all users who can access the Storage Server.
Add / Edit / Remove - Allows you to add users, edit passwords and remove users.
Note
26
Users who have Operator status cannot configure, register and
change Camera Servers, or configure and change recording
schedules.
By default, a user 'admin' is created with the password 'NVR'. It
is strongly recommended that this is changed after installation.
It is necessary to set up users on all Storage Servers. A
particular user should be set up to have the same password on
each Storage Server.
Tick to enable user to have
Administrator privileges (full
access to configuration
functions).
Use the Add button to add
users to this field. There is no
limit to the number of users you
can add.
Click Apply to save changes.