Frame Advance/Frame Reverse; Looping A Section Of A Disc - Pioneer DV-355 Operating Instructions Manual

Playing Discs

Frame advance/frame reverse

You can advance or back up a DVD disc
frame-by-frame. With Video CD/Super VCDs,
you can only use frame advance.
During playback, press 8 (pause).
1
/e or E/
2 Press
advance a frame at a time.
To resume normal playback, press 3
3
(play).
• The picture quality when using frame
reverse is not as good as frame advance.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
• When changing direction with a DVD disc,
the picture may 'move' in an unexpected
way. This is not a malfunction.

Looping a section of a disc

The A-B Repeat function allows you to
specify two points (A and B) within a track
(CD and Video CD) or title (DVD) that form a
loop which is played over and over.
A-B Repeat is not available with MP3 discs,
Super VCDs, Video CDs in PBC mode, or
unfinalized CD-R/RW discs.
to reverse or
1 During playback, press PLAY MODE
and select 'A-B Repeat' from the list of
functions on the left.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
2 Press ENTER on 'A(Start Point)' to set
the loop start point.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
3 Press ENTER on 'B(End Point)' to set
the loop end point.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
After pressing ENTER, playback jumps back
to the start point and plays the loop.
• The minimum loop time is 2 seconds.
4 To resume normal playback, select
'Off' from the menu.
05
29
En