FLIR DNB13TL2 Instruction Manual page 15

6. To change the camera's
viewing angle:
• Loosen the stand screw
using the included allen key.
• Loosen the adjustment ring
by hand.
• Move the camera into the
desired position, then
tighten the stand screw and
adjustment ring.
7. To adjust the camera's zoom
and focus:
• Open the service
compartment near the
camera lens by loosening
the screws (x2) with the
included allen key.
• Twist the zoom and focus
knobs counterclockwise to
unlock. Move the knobs left
or right to adjust the zoom
and focus.
• Tighten the knobs when
finished.
At the end of installation, ensure both service compartments
are firmly closed to ensure the weatherproof rating of the
camera.
6
Stand screw
7
Focus
Camera Installation
Adjustment ring
Zoom
7