Call Handling Features
Turning the Speakerphone off during a call
Lift the handset at any time.
The speaker and the corresponding indicator light turn off; voice control
reverts to the handset.
Ending a call while the speaker is active
Press the Speaker (
The speaker and the corresponding indicator light turn off and the call
terminates.
NOTE:
It is also possible to disable the Speakerphone feature. If your Speakerphone does not
operate as indicated, contact your System Administrator to be sure your telephone's
Speakerphone is enabled.
Transfer
The Transfer feature lets you transfer a call from your telephone to another
extension or outside number.
Sending a call to another telephone
1. With the call active (or with only one held call and no active calls), press the
Transfer (
The call is placed on hold and its associated indicator light blinks; the Hold
(
activates.
2. Dial the number to which you want to transfer the call.
The call is sent to the extension or number you dialed.
3. If you do not want to announce the call, press the Transfer (
again. If you wish to wait for an answer, remain on the line, then press the
Transfer (
A two-second display message indicates the transfer is complete.
4. Hang up your handset.
2-4
Issue 1 August 2002
) button.
) button.
) icon displays and you hear a dial tone while the next line
) button after announcing the call.
Chapter 2: Using Your 4602 IP Telephone
) button