Lcd Operational Changes; Memory Reporting During Auto Test - Regency 4720 Installation Manual

Regency ® Model 4720 Control/Communicator Installation Manual (P/N 150476, Rev. A)
Type = Fire
24 hr alarm
24 hr trouble
N.O.
No shutdown
Type = Sprinkler
24 hr alarm
24 hr trouble
N.O.

LCD Operational Changes

25.2
With Revision N, if an alarm, trouble, or supervisory condition exists, the LCD scrolls the words ALARM,
TROUBLE, or SUPERVISORY. You can then press STAT to display the zone number and location of
trouble and supervisory conditions. Press MEM to display the zone number and location of alarms.

Memory Reporting During Auto Test

25.3
When an Auto Test occurs, the Model 4720 also sends a report of all unrestored events. It is not possible to
distinguish between old and new events during an Auto Test. Treat all alarms, troubles, and supervisories as
if they were new events. Note that memory reporting is not yet available with the Models 4724 and 4734.
Program As
Water flow = Fire alarm
Wire break = Fire trouble
Valve off = Sprinkler supervisory
Wire break = Sprinkler trouble
Press MUTE, MUTE + CODE to silence.
System Response
77
Revised 10/98