2.1.2.6 Clear CMOS (S1)
Warning!
This jumper is used to erase CMOS data and reset system BIOS informa-
tion.
The procedure for clearing CMOS is:
1.
Turn off the system.
2.
Short pin 2 and pin 3.
3.
Return jumper to pins 1 and 2.
4.
Turn on the system. The BIOS is now reset to its default setting
Table 2.7: CMOS clear (S2)
* default setting
PCM-9386 User's Manual
To avoid damaging the computer, always turn
off the power supply before setting "Clear
CMOS." Before turning on the power supply,
set the jumper back to "3.0 V Battery On."
Condition
unpressed*
pushed
Clear CMOS
10
Result
Normal