Coloured Messaging - ASCOM d62 Talker User Manual

User Manual
Ascom d62 DECT Handset
When a IM has been read, the IM may display several options. Mark the one you want and
press "Select". If the selected option requests input, enter the information needed and
press "Ok". A press on the middle Soft key will change to digit or text input mode
depending on if it is digit or text format in the message. A read message is indicated the
same way as an ordinary message.
Note: If a handset receives an IM update when the original message already has been
deleted, the handset automatically sends a negative acknowledge (NAK) to the system, if
requested.
A very simple interactive message can look like the one in
options depends on the configuration in the client application.
Figure 7. Example of an interactive message
Mobile data from the handset can initiate the application to send the interactive message,
see 7.8 Mobile Data
action can be sending a message back to the application and/or dialling a specific number
etc.
7.7

Coloured Messaging

Note: This is a system dependent feature for d62 Messenger and d62 Protector only.
It is possible to send coloured messages to handsets. The sender of a message (that is, an
application) determines the colour of the message. Coloured messaging can be useful for
categorizing messages. In
message, and a read message) in the message inbox (left in the figure). The messages are
indicated by a gradient colour bar behind the envelopes. In addition, a gradient colour bar
is shown below the envelop when reading a coloured message (right in the figure).
2009-12-08/ Ver. C
Conference this evening!
Will you be there?
"Fred Smith" <Fred.Smith
@company.com
2007-04-20 5:44pm
Options Delete
Options
Reply
Select
on page 39. The user can then select one action from the list. The
figure 8 on page 39, there are two coloured messages (a new
figure 7 on page 38. The
Close
Back
TD 92477GB
38