Change Dvb-T Default Settings - AEG HES 4890 DVB-T/DVD Instruction Manual

Dvb-t/dvd home entertainment center

Hide thumbs

Table of Contents

Available languages

Understand Menu

Structure

Using the Menu

Downmix

Modifies the characteristic of the speaker output:

LT/RT: Select this setting if you wish to play the DVD in Pro

Logic Dolby Stereo Effect. It enables a realistic dual chan-

nel playback effect.

Stereo: Select this setting if you wish to play a DVD

recorded in 5.1-audio-format in -channell-stereo sound.

Dynamic Range

This concept "Dynamic Range" describes the ratio from the

lowest to the loudest sound. With a high dynamic range very

low, as well as very loud sounds are emitted.

This may cause playback issues. In the event you view a DVD

within a relatively noisy you may adjust the volume to hear

low volume passages, however, it bears the disadvantage that

louder passages are unacceptably loud. Suggestively you may

compromise (reduce) the dynamic range and increase the

output volume.

FULL -2/8: The dynamic ratio is compromised from /8 to

maximum (FULL).

OFF: The dynamic ratio is not compromised (default setting).

Dual Mono

The sound output usually takes place stereo. You may choose

a mono output instead of a stereo output.

Stereo: The output is in stereo (default setting).

Mono L: The output is in mono. On all speakers the signal

is emitted from the "left" stereo channel.

Mono R: The output is in mono. On all speakers the signal

is emitted from the "right" stereo channel.

Mix Mono: The output is in mono. On all speakers the

signal is emitted from the "both" stereo channel.