Changing The Default Settings - AEG DVD 4612 HC Operation Manual

Changing the default settings

Themen
Understanding
the menu structure
Using the menu
60
DVD4612HC_GB.indd 60 DVD4612HC_GB.indd 60
Rotating a photo
You can use the Cursor buttons to rotate a photo during replay:
Rotate for 180°: Cursor Button „ ", „ "
Rotate clockwise for 90°: Cursor Button „ "
Rotate counter-clockwise for 90°: Cursor Button „ "
Changing the default settings
A large number of default settings can be comfortably changed via the screen menu.
Press the SETUP-button (Fig. 3/9) on the remote control to start the menu for
changing the default settings.
NOTE:
Many of these default settings can be changed via both the remote control
and the menu. The difference is: If you change the default settings via the
remote control, these changes will only be valid until the DVD-Player is
switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
Main menu: The main level is represented by graphical symbols.
Sub-menu: The corresponding sub-menu options can be found under
each of the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 3/10) ( / ) on the remote control to
browse through the main menu.
In order to change from the main menu to the submenu, press the cursor
button ( ).
You can also move through the submenu with the cursor buttons ( / ).
Select a menu option with the ENTER button (Fig. 3/30).
Use the ENTER button also to select an option (e.g. "PAL" in the illustration
on the left). The selected option (in the example „PAL") is now highlighted.
To change back from the submenu to the main menu, press the cursor
button ( ).
14.09.2007 14:45:12 Uhr 14.09.2007 14:45:12 Uhr