AEG HES 4890 DVB-T/DVD Instruction Manual page 65

System Settings
SYSTEM SETUP
TV SYSTEM NTSC
PAL
AUTO
SCREEN SAVER ON
OFF
TV TYPE 4:3 PS
4:3 LB
16:9
PASSWORD - - - -
RATING 1 KID SAFE
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 ADULT
DEFAULT RESTORE
TV-System
Coordinate the output of the unit with the color transmission
system of you display unit.
NTSC: System is primarily used in North America.
PAL: System is primarily used in Europe.
AUTO: If your unit is a multi system device use this setting.
Screen Saver
The unit can display a freeze frame on the screen indefinitely.
This may damage the screen. Therefore we suggest activating
the screen saver.
The following options are available:
On: Screen saver is activated (default setting).
Off: Screen saver is deactivated.
TV Type
Here you may adjust the output of the DVD-Player to match
the aspect ration of your display unit.
Background: Unless you have a wide-screen TV, the aspect
ratio of your image display is 4:. Most movies however, have
an aspect ratio of 16:9, therefore the picture is too wide for TV
playback.
You may select here how the playback of the movie will ap-
pear on your output device:
4:3 PS: You may only view the center area of the movie.
The edges are cut off. ("Pan-Scan").
4:3 LB: You may view the entire range of the movie in a
reduced version; therefore a black bar appears on the top
and bottom of the screen. ("Letter-Box").
16:9: Choose this option if you have a wide-screen TV.
Keep in mind that movies recorded in an aspect ratio of 4:
will display in the same 4: ratio. Therefore it will not popu-
late the entire screen of the wide-screen TV.
Note:
The setting "4:/PS" is not supported by all DVDs.
Password
You must create a password if you want to child-proof the
DVD-Player. The settings will be protected against use by
children and may be changed only by you.
To change the password you must first enter the default cur-
rent default password. The default password is "0000".
Note:
If you forget your password you may deactivate the child
safety function by using the default password.
To change the password proceed as follows:
1. Enter the current password using then number keys (Fig.
/) of the remote control.
The password is displayed on the screen as "XXXX" to
prevent access by unauthorized individuals.
English
65