Change Screen Settings - AEG HES 4890 DVB-T/DVD Instruction Manual

Unit Ports
Turn on Unit
(Fig. 1/2 / 3/32)
Connect the cable of your DVB-T antenna device or alter-
natively your DVB-T room antenna to the DVB/ATV ANT.
connector at the back of the unit.
This unit also features an integrated analog receiver.
To receive cable TV programs using the integrated analog
receiver you must connect your fixed cable unit.
Connect the cable from your cable connection to the DVB/
ATV ANT. connector at the back of the unit
USB Port (Fig. 2/17)
Connect the USB-storage media to the respective connector
on the unit.
Memory card slot (Fig. 2/16)
Insert a MMC/SD memory card or MS memory card into the
designated slot of the unit.
Turn the unit on by pressing the stand by key "STANDBY" on
the remote control or on the front panel of the unit.

Change Screen Settings

Press the MODE key (Fig. /6) to start the menu. Select the
respective menus (VIDEO, AUDIO, TV, SYSTEM) with the
►/◄).
direction keys (
Select options with the direction keys (▲/▼) (Fig. 3/28).
Select settings with direction keys (►/◄).
VIDEO
You may set brightness, contrast, color, hue (NTSC only) and
the screen format in the "VIDEO" menu.
AUDIO
You may select your audio settings here. Choose one of the
default values or select value for bass (BASS) and treble
(TREBLE) manually.
Note:
Upon setting bass and treble manually CUSTOM (user) is
displayed automatically on the EFFECT option.
English
5