Function Run; Factory Setup - Syscom Video MINITRAX3IP User Manual

3.14 Function Run

This Function Run menu allows you to execute the function when you use a keyboard or a DVR
without the function keys (Preset, Pattern, Tour and Scan).
1. Select the desired Function by pushing the Joystick up or down.
2. Select the number by twist the Joystick in PRESET, PATTERN, TOUR and SCAN.
3. Press the CTRL or IRIS Open key to execute.
NOTE: To execute the function, you should save the function (PRESET, PATTERN, TOUR,
and SCAN) first.
- HOME
Select "HOME" and press the CTRL key. The dome camera goes to the default position that it
returns to after an assigned period of inactivity passes. The default position may be a Preset,
Tour, Pattern or no action.
- AUTO PAN
You can execute the endless auto pan to turn in one direction continuously by selecting the
Auto Pan.

3.15 Factory Setup

Pressing 250 + PRST keys pops up this menu.
TOUR DWELL TIME means the dwell time between Tours.
ANSWER DELAY means the response time of the dome and you don't need to change in normal
condition.
FUNCTION RUN SETUP
PRESET
PATTERN
TOUR
SCAN
HOME
AUTO PAN
EXIT(ESC TO EXIT)
FACTORY SETUP
TOUR DWELL TIME
ANSWER DELAY
SAVE AND EXIT(ESC TO CANCEL)
29
(CTRL KEY)
: ---
: ---
: ---
: ---
: 03 SEC
: 03 SEC