Digimerge DPV24D Instruction Manual page 26

CAMERA ADJUSTMENT
PRIVACY:
Hide an area so that it is not displayed on the monitor.
1. Highlight 'PRIVACY' in the SPECIAL setup menu.
2. Move the the joystick left/right to change setting
to OFF/ON
3. Press the joystick to access the submenu for ON setting
- AREA SELECT:
- AREA DISPLAY:
- COLOR:
LANGUAGE:
The OSD supports English ,Korean,Japanese, Chinese, Simplified Chinese,Russian
DEFECT:
For Service use only!
ADJUST
ADJUST:
SHARPNESS: Image edge sharpness 0 (soft image)
to 31 oversharp (default is 12)
MONITOR: CRT/LCD/USER setting for monitor type
Note: For direct monitor connection only.
(default is CRT)
OSD COLOR: 0-15 color for OSD menu text
(default is 3)
RESET
RESET:
This will reset all settings for all menus to manufacturer
defaults. This allow you to return to shipped
settings from the manufacturer.
Select privacy area number. AREA 1-8
With the area slected will be shown ashing on and off visually.
Turns selected privacy area ON or OFF.
Pressing joystick when ON will change display to set
the position and the size of the area. Moving the joystick
will change the setting, and press joystick to accept.
After you have set both position,size you can RET or AGAIN
Range 0-15. Sets the color of the selected privacy area.
-22-
PRIVACY
AREA SELECT AREA�
AREA DISPLAY ON
COLOR -------|- �
RETURN RET
ADJUST
SHARPNESS -|------- ��
MONITOR CRT
OSD COLOR �
RETURN RET
RESET
FACTORY RESET
RETURN RET