Digimerge DPV24D Instruction Manual page 15

CAMERA ADJUSTMENT
Using this function, you can control screen brightness.
1. Highlight 'LENS' in the main setup menu
2. Press the joystick to access the DC lens setup menu.
3. After completing setting update, highlight 'RETURN' to save setting and return to previous menu
essing down
function.
The EXPOSURE menu is used to set the automatic
light control method for the camera.
1. Highlight 'EXPOSURE' in the main setup menu
2. Press the joystick to access the exposure setup menu.
e
essing
LENS
SETUP
1. LENS
2. EXPOSURE
• NOTE
The brightness level can be adjusted within
the range of 0 - 100. Default setting - 50
With Model DPD23D DC Lens setting is MANUAL
EXPOSURE
SETUP
1. LENS
2. EXPOSURE
3. WHITE BAL
SHUTTER : Select the shutter mode. (1/60, FLK - 1/100,000 sec, x2 - 256)
Default setting is 1/60
AGC: Auto gain control (LOW / MIDDLE / HIGH)
Default setting is MIDDLE
DC
LENS
BRIGHTNESS -----|----��
RETURN
DC
MANUAL
EXPOSURE
SHUTTER
AGC
SENSE-UP
BLC
D-WDR
RETURN
-11-
RET
�/��
MIDDLE
AUTO
OFF
OFF
RET