Digimerge DPV24D Instruction Manual page 20

CAMERA ADJUSTMENT
DAY/NIGHT
The DAY/NIGHT menu is used to configure the day and night related settings for the camera.
1. Highlight 'DAY&NIGHT' in the main setup menu
2. Move the the joystick left/right to change setting to AUTO/COLOR/ B/W
3. Press the joystick to access the submenu's for AUTO and B/W settings
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and
white. Press joystick to turn ON or OFF
the burst signal in B/W mode.
AUTO : The mode is switched to 'Color ' in a normal
environment, but switches to 'B/W' mode
when ambient illumination is low. To set up
the switching time or speed for AUTO mode,
press the joystick.
You can now set the Delay in seconds
for the Day - Night and the Night - Day
transitions.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL MANUAL
AUTO
4. DAY NIGHT
-16-
DAY NIGHT B/W
BURST OFF
RETURN RET
DAY NIGHT AUTO
DELAY -|----- �
D-N (AGC) ---|--- ���
N-D (AGC) ---|-- ��
RETURN RET