Functions - Lindy SC5 User Manual

Functions

The Functions menu contains a collection of
procedures that affect various aspects of SC5
operation. Only the Admin user is granted
access to all functions, other users are offered
only the following options:
• Restore Standard Mouse,
• Restore Intellimouse,
• Power control - only computers to which
a user has access rights can be switched.
To get here
1 From a local or remote keyboard, log on
as a standard (limited options) or 'admin'
user.
2 Press (hotkeys can change).
3 Press to select 'More menus'.
4 Select 'Functions'.
Restore Standard Mouse
This option is used to resume standard mouse operation if it has ceased to
operate, for instance, if it has been connected without rebooting the SC5.
Restore Intellimouse
This option is used to resume Microsoft Intellimouse operation if it has ceased to
operate, for instance, if it has been connected without rebooting the SC5.
Clear C User Station Password
Available only at the local console connection, this option places any User
Station extender that is locked in password mode into configuration mode. The
extended user can then clear or re-enter the password, as required.
Reset to Factory Defaults
Returns all key settings within the SC5 to their original states.
WARNING: This function will clear all computer and user lists that are stored
within the SC5.
When this option is selected, you must press
data will be rewritten and a completion message displayed after a short period.
LINDY SC5
Functions
Restore Standard Mouse
Restore Intellimouse
Clear C5 User Station Password
Reset to Factory Defaults
Send Data to RS232 port
Read Data from RS232 port
Enter-Run Function
-Up -Down Esc-Quit
to confirm the action. The internal
Send Data to RS port
This option is used to save SC5 configuration information to a specially
connected computer. A temporary link must be made using the
the rear of the SC5 and the computer must run a custom routine available from
LINDY. The resulting download file can be optionally edited (using a text editor
or spreadsheet) and/or reloaded into the SC5. This option is especially useful
in complex cascade arrangements where many computers are attached. See
Saving and restoring configuration settings
Read Data from RS port
This option is used to reload configuration information into the SC5 from a
specially connected computer. See above for more details.
port at
OPTIONS
for more details.