Timeout Setting For Switching Between Local And Remote Ports; Mouse Switching Of Channels - Lindy CPU SWITCH Installation And Use Manual

Lindy cpu switch installation and use
Hide thumbs Also See for CPU SWITCH:
Table of Contents

Advertisement

4.5
Timeout setting for switching between the local and remote
keyboard/mouse ports (A and B)
If you are controlling the LINDY CPU Switch from two locations then you will have connected
keyboards, monitors and mice to the local and remote ports (A and B). The LINDY CPU Switch will
accept keyboard and mouse data from either location and the video is duplicated on both monitors.
Only one of the ports may be used at a time. The other port is automatically disabled although the
video continues to be displayed. This port is re-enabled for keyboard and mouse data when there
has been no activity from the currently active port for the switchover timeout period. This timeout
period is selectable from 2 seconds to 10 minutes using the 'S' options in configure mode as
follows:
KEYS
CONFIGURATION DESCRIPTION
2 seconds of inactivity before allowing switchover between A & B ports (default)
5 seconds of inactivity before allowing switchover between A & B ports
10 seconds of inactivity before allowing switchover between A & B ports
30 seconds of inactivity before allowing switchover between A & B ports
1 minute of inactivity before allowing switchover between A & B ports
5 minutes of inactivity before allowing switchover between A & B ports
10 minutes of inactivity before allowing switchover between A & B ports
4.6
Mouse mode and mouse switching of channels
A three button PS/2 mouse can be used to switch channels on the LINDY CPU Switch by default.
To switch to the next channel, the user simply holds down the central button or wheel button and
presses the left hand button to change channel. If the user does not wish to take advantage of this
feature, it can be disabled by selecting U2, U3 or U5. If the third button is being used to switch the
LINDY CPU Switch then it is not available for use with PC software. Consequently in modes U1,
U2 and U4 the LINDY CPU Switch reports to the PCs that a 2 button mouse is connected. If you
wish to use the full function of a 3 button mouse or IntelliMouse for your PC software then you
should select option U3 or U5.
The LINDY CPU Switch supports 'Internet Mice' that are compatible with the Microsoft
IntelliMouse. These are fitted with a wheel or other scroll control and sometimes have additional
buttons. Examples are:
Microsoft
Logitech
Logitech
Page 28
®
IntelliMouse
®
Pilot Mouse +
®
MouseMan+
Installation & Use – English Guide
CPU
®
Genius
NetMouse
®
Genius
NetMouse Pro
CPU
CPU
CPU
2
4
4 OSD
8 OSD
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
LINDY ELECTRONICS LTD
CPU
16 OSD
Yes
Yes
Yes
Yes
Yes
Yes
Yes

Advertisement

Table of Contents
loading

Table of Contents