Lindy SC5 User Manual page 46

USB Country Code
Some computers query the keyboard to find
out its country code and key layout. These
computers use this information to configure
the way that they interpret the data coming
from the keyboard and so it is important for
the correct country information to be supplied.
Not all keyboards report country information
and two different styles of keyboard may be
connected to the SC5.
To get here
1 From a local or remote keyboard, log on
as a standard (limited options) or 'admin'
user.
2 Press (hotkeys can change).
3 Press to select 'More menus'.
4 Press again to select 'Advanced
menus'.
5 Highlight the USB Country Code option
and press Enter.
6 Select 'Setup Options'.
Country Code
Settings: AUTO, MANUAL, DISABLED
In AUTO mode the SC5 will attempt to query the keyboard attached to the local
port to ascertain a country code. If a country code is not found then the SC5
will use the current value of the Default Country option. In MANUAL mode, the
connected local keyboard is not queried for country information and instead the
Default Country value is reported to all computers that request country infor-
mation. In DISABLED mode, no country information is supplied to computers
requesting country information.
LINDY SC5
USB Country Code
Country Code AUTO
Default Country 32
Space-Toggle
-Up -Down Esc-Quit
Default Country
The codes that may be used within this option are as follows:
Country Code
Arabic 01
Belgian 02
Canadian-Bilingual 03
Canadian-French 04
Czech Republic 05
Danish 06
Finnish 07
French 08
German 09
Greek 10
Hebrew 11
Hungary 12
International (ISO) 13
Italian 14
Japan (Katakana) 15
Korean 16
Latin American 17
Netherlands 18
Norwegian 19
Country Code
Persian (Farsi) 20
Poland 21
Portugese 22
Russian 23
Slovakian 24
Spanish 25
Swedish 26
Swiss/French 27
Swiss/German 28
Switzerland 29
Taiwan 30
Turkish-Q 31
UK 32
US 33
Yugoslavia 34
Turkish-F 35
Reserved 36-255
Not supported 00