User Preferences - Lindy SC5 User Manual

User Preferences

The User Preferences are system operating
parameters that are independently selectable
for each user and affect only their screen.
To get here
1 From a local or remote keyboard, log on
as a standard (limited options) or 'admin'
user.
2 Press (hotkeys can change).
3 Press to select 'More menus'.
4 Select 'User Preferences'.
OSD Colour
Settings: SCHEME 1, SCHEME 2, SCHEME 3
As you toggle between these options you will see the colour of the menu
change to show the selected scheme. The menu schemes have been specially
chosen to provide a high contrast with the colours that you would normally see
on a computer screen.
Reminder Banner
Settings: ENABLED, DISABLED
When the reminder banner is enabled, the name of the currently selected
computer will appear in a small reminder banner. This is normally located at the
top of the screen in a central position but may be moved as required (see
move the reminder banner).
Reminder Colour
Settings: BLUE/TRANS, PINK/TRANS, BLUE/WHITE, WHITE/RED
You can select the colour of the reminder banner. The BLUE/TRANS and PINK/
TRANS select blue or pink text with a transparent background. The BLUE/WHITE
and WHITE/RED settings select blue and white text on solid white and red
backgrounds.
LINDY SC5
User Preferences
OSD Colour : SCHEME 1
Reminder Banner : ENABLED
Reminder Colour : BLUE/TRANS
Screen Saver type : MOVING DOT
Confirmation Box : ENABLED
Space-Toggle
-Up -Down Esc-Quit
To
Screen Saver Type
Settings: BLANK, MOVING DOT
You can select the type of screen saver. If you select BLANK then the screen will
blank completely. If you select MOVING DOT then a moving dot will be displayed
on a blank background. The dot regularly changes colour and bounces off the
sides of the screen in a zigzag pattern.
Confirmation Box
Settings: DISABLED, ENABLED
When enabled, a confirmation box is displayed on screen for three seconds after
a computer is selected. The confirmation box indicates the current user port and
user name, the selected computer and the connection status.
0