Lindy SC5 User Manual page 33

Standard hotkeys
The range of hotkey combinations are as follows:
Note: If your hotkeys have been changed, substitute them for
the examples given here.
Selects port 1
Selects port 2
• •
• •
then Selects port 10
Note: When entering multiple digit addresses as
above or for even longer cascaded computers,
keep
numbers have been entered.
Selects the next available port
Selects autoscan mode where each (authorised)
port is displayed for a period determined by
the administrator. To cancel autoscan mode,
simply select any fixed channel using any of the
suggested methods.
Switches off the video signal – this will cause
a power saving monitor to enter its standby
mode. To awaken the monitor, simply select
any fixed channel using any of the suggested
methods.
Logs out the current user (if security is enabled)
or selects port 0 to disable the video signal (if
security is disabled).
& , , or Moves the currently displayed on-screen menu
around the screen.
and in
and pressed down until all other
To select a computer using the on-screen menu
1 Select the on-screen menu in one of two ways:
• By simultaneously pressing and then releasing
• By pressing the middle and right buttons of a three button mouse.
Note: The mouse switching option is usable only if the 'Mouse
Switching' option is enabled. See
At this point, depending on the security settings and the current log in
situation, one of two things will be displayed, either the login screen, or the
Selection menu:
LINDY SC5
Computer Port
Computer 1 01
Computer 2 02
Computer 3 03
Computer 4 04
Computer 5 05
Computer 6 06
Computer 7 07
Computer 8 08
User Status
ADMIN SHARED USE
F1-More menus F3-Find
Esc-Quit F4-Logout
2 Use the and keys (or the scroll wheel of an IntelliMouse) to highlight
the required computer name. Alternatively (for large configurations), press
to perform an alphabetical search for a particular port name.
Note: If security has been enabled then only computers to which the current
user port has permission will be displayed.
3 Press to select the highlighted port.
, or
Global preferences for more details.
The Selection Menu – here you can
select computers by name.