Registering Computers (Edit Computer List) - Lindy SC5 User Manual

Registering computers (edit computer list)

To create/edit computer entries
1 Display the Configuration menu. Note: You must be logged-in as the
ADMIN user.
2 Highlight 'Edit Computer List' and press
LINDY SC5
Edit Computer List
Computer 1 01
Computer 2 02
Computer 3 03
Computer 4 04
Computer 5 05
Computer 6 06
Computer 7 12
Computer 8 0803
Ins-Add Del-Delete
F1-Clone Enter-Edit
-Select F3-Find
Esc-Quit
3 Either:
• Create a new computer entry – Press
• Edit an existing computer entry – Highlight a computer name and press
. Press (Backspace) to delete existing characters and enter the
required new name (up to 16 characters).
Note: Avoid creating two names for the same computer port.
4 Press and the cursor will move to the computer port column on the right
side. Change or enter the port address of the computer as required. See the
Addressing computers in a cascade
.
and enter a new name, or
section for more details.
5 When the port address is complete, press
will be displayed.
LINDY SC5
Edit access rights
+
admin
Sam +
Oliver +
Johnny
Space-Toggle Enter-Save
F1-All F2-None
F3-Find
Esc-Quit
Here you can determine which users should have access to the created/
edited computer. Only users that show a '+' marker to the right of the menu
box will be granted access to the computer.
Note: Access rights for particular user accounts to computers can also be
controlled from the 'Edit User List' menu
6 Select and deselect users as follows:
• Individual user - Highlight a user name, then press
remove, the '+' marker.
• Allow access for all users – Press
• Allow no user access (except ADMIN) – Press
7 When all settings have been made, press
return to the 'Configuration Menu'.
. The 'Edit access rights' menu
Cross markers indicate which
users will be granted access to
the currently selected computer.
To change the permission state:
Highlight a user name and press the
space bar.
to apply, or
to save and exit. Press to