LG L9322 Series Owner's Manual page 51

,
Note
If you set the [AUTO RETURN] to [ON], the [HOME POSITION] option is set to [OFF] automatically and you
can not use it.
Tilt Limit
To remove block area on videos, tilt angle limit can be configured.
1. Select [TILT LIMIT] in [SPECIAL].
2. To turn on this function, select [ON] with [Near] button or [Far] button. To turn off this function,
select [OFF] with [Near] button or [Far] button.
Auto Flip
In the event that tilt angle arrives at the top of the tilt orbit (90°), the camera turns on its axis by 180° at
the top of the tilt orbit and moves to the opposite tilt direction (180°) to keep tracing targets.
1. Select [AUTO FLIP] in [SPECIAL].
2. To turn on this function, select [ON] with [Near] button or [Far] button. To turn off this function,
select [OFF] with [Near] button or [Far] button.
Motion Det
Configures the parameters for Motion Detection function.
1. Select [SPECIAL] menu and set [MOTION DET] option to [ON]. And then press [Open] button or
[Close] button to enter into its sub-menus.
2. Adjust detection sensitivity with [Near] button or [Far] button in [SENSITIVITY] option.
3. Adjust detection area with [Near] button or [Far] button in [WIDTH] and [HEIGHT] option.
Operation 51
4